Juniper Networks J-Series - Manual (Page 144)

Table 56: Summary of Key DLSw Routing Information Output Fields (continued)
Additional Information Values Field
DLSw protocol version. Version
number
Frequency at which packets are sent. Initial
pacing
window
Juniper Networks software version information. Version
string
DLSw Circuits
DLSw circuit ID Circuit id
MAC address of the local DLSw peer. Local
Address
Number of the local service access point. LSAP
MAC address of the remote DLSw peer, Remote
address
Number of the destination service access point. DSAP
Connectivity status; disconnected or connected. State (or
circuit
state)
IP address of the remote DLSw peer. Peer (or
remote
peer
address)
DLSw Peers
IP address of the remote DLSw peer. Peer
Status of the connection. State
Number of circuits on the DLSw network. Circuits
IP address of the local DLSw peer. Local
address
Time of circuit creation. Created
time
Length of time that the connection is active. Connected
time
Size of the inital pacing frame. Receive
initial
pacing
Length of time before a circuit becomes inactive. No circuits
timeout
122 ■ Using the Monitoring Tools
J-series™ Services Router Administration Guide