Janome Memory Craft 6500 - Manual (Page 10)

8
13
14
15
16
17
12
13
14 15
16
17
12 Pattern selection buttons
Press these buttons to select the desired pattern. In
the direct selection mode (Mode 1), patterns number
01 to 10 can be directly selected by pressing the
corresponding button.
In other modes, enter the two-digit pattern number
with the numeral buttons.
Auto thread cutter button:
Press this button after the last memorized pattern and the machine will automatically
trim the threads when sewing is finished.
Clear button:
Press this button to delete a pattern from programmed pattern combination. Pressing
this button after sewing or pressing and holding for a few seconds will delete entire
pattern combination and the LCD screen will return to the initial display of the selected
mode.
Turnover memory button:
Press this button to memorize a pattern in mirror image. In the monogram mode,
pressing this button will reduce the letter to 2/3 of the original size.
Memory button:
Press this button to memorize the desired patterns. Up to 50 patterns can be
memorized.
Locking stitch button:
Press this button after memorizing the last pattern and the machine will sew the
pattern combination and lock the stitch off then stop automatically when sewing is
finished.