Janome Memory Craft 6500 - Manual (Page 17)

15
4
Threading the Machine
Raise the presser foot lifter. Press the up/down needle
button twice to raise the needle to its highest position.
1 Pass the thread through the guide on the thread
guide bar from behind.
1 Thread Guide Bar
2 Pass the thread through the right thread guide.
2 Right Thread Guide
3 Hold the upper thread with both hands as shown
and slip it under the thread guide plate.
3 Thread Guide Plate
4 Draw the thread toward you and pass it into
the left thread guide. Draw the thread along the
right channel.
4 Left Thread Guide
NOTE:
Be sure to use the spool holder to secure the spool in
place.
1
3
4
3
1
3
4
2
2