JBL SYNTHESIS SDP-40HD - Manual (Page 124)

Mode Adjust JBL
5-16
MONO SURROUND
This mode, designed for playback of mono sources, sends the
mono source to all channels.
See page 5-35 for detailed parameter descriptions.
MONO
This mode, designed for playback of mono sources, sends mono
sources to the center channel.
See page 5-35 for detailed parameter descriptions.
5.1 FILM
The 5.1 L7 FILM mode is a proprietary Lexicon listening mode
designed for playback of 5.1-channel Dolby Digital encoded film
sources, and provides remarkable improvement compared to other
decoders.
It derives seven channels from 5.1-channel input sources with
enhanced front steering. When both side and rear speakers are
present, the 5.1 L7 FILM listening mode also increases the perceived
length and sense of envelopment of the listening space.
See page 5-35 for detailed parameter descriptions.
Parameter Settings
OUTPUT LEVELS Refer to page 5-33
CUSTOM Refer to page 5-34
Parameter Default Setting Possible Settings
SUB L/R LVL +0dB OFF, -30dB to +12dB
CUSTOM Refer to page 5-34
MODE ADJUST MONO SURROUND
MODE ADJUST MONO
Parameter Default Setting Possible Settings
VOCAL ENHANCE +0.0dB +6.0dB, +3.0dB, +0.0dB
RE-EQUALIZER ON ON, OFF
SOUND STAGE REAR REAR, NEUTRAL, FRONT
5 SPKR ENHANCE ON ON, OFF
BASS ENHANCE OFF ON, OFF
SURR ROLLOFF 15.3kHz 500Hz to 20kHz, OFF
REAR DLY OFFSET 15ms OFF, 1ms to 30ms
COMPRESSION OFF AUTO, ON, OFF
LFE MIX +0.0dB -10.0dB to +0.0dB
OUTPUT LEVELS Refer to page 5-33
CUSTOM Refer to page 5-34
MODE ADJUST 5.1 FILM