Specifications, Appendix – JBL SYNTHESIS SDP-40HD User Manual

Page 162

Advertising

Appendix

JBL

A-2

SPECIFICATIONS

HDMI Input & Output Connectors

HDMI Inputs

• 6 HDMI Type A (19-pin) connectors

HDMI Output

• 1 HDMI Type A (19-pin) connector

HDMI Performance mmmmm

Video Resolutions

• 480i, 480p, 720p, 1080i (resolutions dependent on the

capability of the HDMI display connected to the
SDP-40HD HDMI output connector)

Audio Sample Rates

• 44.1kHz, 48kHz, 88.2kHz, 96kHz

Audio Input & Output Connectors

Analog Audio Inputs

• 8 stereo (RCA) or 5 stereo and one 5.1-channel connectors

Digital Audio Inputs

• 6 S/PDIF coaxial (RCA), 6 S/PDIF optical, and 1 AES/EBU

(XLR) connectors

• Coaxial and optical input connectors conform to IEC-

958, S/PDIF standards

• Accepts 44.1, 48, 88.2 and 96kHz sample rates
• Accepts 16-24 bits PCM audio, Dolby Digital, DTS and

DTS-ES discrete data formats

Main Zone Audio
Outputs

• 12 unbalanced (RCA) and 12 balanced (XLR, SDP-40HD

Balanced only) connectors for Front L/R, Center, LFE,
Subwoofer L/R, Side L/R, and Rear L/R, and Auxiliary L/R

Zone 2 Audio Outputs • 2 unbalanced (RCA, 1 fixed and 1 variable output level)

stereo connectors and 1 balanced stereo connector
(XLR, variable output level, SDP-40HD Balanced only)

Record Zone Audio
Outputs

• 2 unbalanced (RCA, 1 fixed and 1 variable output level)

stereo connectors

• 1 S/PDIF coaxial (RCA) and 1 S/PDIF optical connector

(in parallel)

Main Zone Audio Performance

A/D Conversion

• 24-bit, 96kHz, dual-bit ΔΣ

architecture

D/A Conversion

• 24-bit, 44.1 to 192kHz, multi-bit ΔΣ architecture

Frequency Response

• 10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz, refer-

ence 1kHz

THD + Noise

• Below 0.003% at 1kHz, maximum output level

Dynamic Range

• 108dB minimum, 111dB typical, 22kHz bandwidth

Signal-to-Noise Ratio

• 108dB minimum, 111dB typical, 22kHz bandwidth

Input Sensitivity

• 200mVrms (2Vrms for maximum output level) at 0dB

input gain

Input Impedance

• 100kΩ in parallel with 150pF

Output Level

• 150mVrms typical, 6Vrms maximum (RCA connectors)
• 300mVrms typical, 12Vrms maximum
• Maximum value with full-scale input signal and volume at

+12dB

Output Impedance

• 100

in parallel with 150pF (RCA connectors)

• 50

in parallel with 150pF (XLR connectors, SDP-40HD

Balanced only)

Zone 2 & Record Zone Audio Performance

A/D Conversion

• 24-bit, 44.1 to 96kHz, dual-bit ΔΣ

architecture (Record

Zone only)