JBL SYNTHESIS SDP-40HD - Manual (Page 71)

SDP-40HD Setup
3-31
SETTING CROSSOVER POINTS (continued)
SPEAKER SETUP PARAMETERS
The table below indicates the speaker setup parameters for
configuring all possible settings for speaker setup parameters in the
CUSTOM SETUP and SYNTHESIS 7CH SETUP menus.
Speaker setup parameters perform the same function regardless of
the selected speaker setup. When a parameter setting is adjusted on
one menu, the corresponding parameter setting is automatically
adjusted on the other menu. For example, when a SYNTHESIS 7CH
speaker setup is selected, the speaker setup parameters on the
CUSTOM SETUP menu are set to THX 80Hz.
* These parameters cannot be adjusted on the SYNTHESIS 7CH SETUP menu.
† When the THX ULTRA2 SUB parameter is set to OFF, the BGC parameter is not available (N/A).
SPEAKERS SETUP or SETUP CUSTOM SETUP SPEAKERS SYNTHESIS 7CH SETUP
Parameter
CUSTOM SETUP Menu SYNTHESIS 7CH SETUP Menu
Default Setting Possible Setting Default Setting Possible Settings
FRONT L/R* 80Hz FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz 80Hz 80Hz
CENTER* 80Hz FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE 80Hz 80Hz
SIDE L/R* 80Hz FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE 80Hz 80Hz
REAR L/R 80Hz FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE 80Hz 80Hz, NONE
SUB L/R* MONO MONO, STEREO, NONE MONO MONO
SUB XOVER* 80Hz FULL, 30Hz to 120Hz, THX 80Hz 80Hz 80Hz
LFE* OFF ON, OFF ON ON
THX ULTRA2 SUB OFF ON, OFF OFF ON, OFF
BGC N/A† ON, OFF N/A† ON, OFF
ASA APART APART, CLOSE, TOGETHER APART APART, CLOSE, TOGETHER