JBL SYNTHESIS SDP-40HD - Manual (Page 23)

SDP-40HD Basic Operation
2-11
COMMAND MATRIX
The numbers in the remote control illustrations correspond to the
numbered items in the matrix. The sections following the
command matrix provide a more detailed explanation of the
functionality and menu structure of the digital controller that can
be accessed through the remote control.
DVD-1 DVD-2 L D
TV
CD
TAPE TUNER
MENU
PVR
SAT
FP
BLUE
OSD
VCR
AUX
GAME
MAIN
SHIFT
STAT
7 / 5 2 CH
MUTE
MUSIC
ZONE REC
LIGHT
MODE VOL
2
3
1
4
Button Main Zone Zone 2 Record Zone Shift
1 Activates and deactivates standby mode when the SDP-40HD rear panel power switch is in the on position.
When standby mode is activated, pressing the standby button deactivates standby mode and activates the
SDP-40HD, including all zones that were activated during the previous operating session. When standby
mode is deactivated, pressing the standby button activates standby mode and deactivates the SDP-40HD. The
red front panel standby button LED lights to indicate that standby mode is activated.
Note: Power is still supplied to the SDP-40HD when standby mode is activated.
2 Activates the remote control back-light, illuminating remote control buttons to make them more visible in the
dark. The back-light also illuminates whenever a remote control button is pressed. Once illuminated, the back-
light remains on for about 5 seconds before extinguishing.
3 Activates the Main Zone command bank, which includes commands that control the Main Zone.
Activates the Zone 2 command bank, which includes commands that control Zone 2 and the Main Zone.
Activates the Record Zone command bank, which includes commands that control the Record Zone.
Activates the Shift command bank, which includes commands that control all zones.
4 Selects the DVD1 input
for the Main Zone. Selects the DVD1 input
for Zone 2. Selects the DVD1 input
for the Record Zone. Deactivates the Main Zone.
Selects the DVD2 input
for the Main Zone. Selects the DVD2 input
for Zone 2. Selects the DVD2 input
for the Record Zone. Deactivates Zone 2.
Selects the LD input for
the Main Zone. Selects the LD input for
Zone 2. Selects the LD input for
the Record Zone. Deactivates the Record
Zone.
Selects the TV input for
the Main Zone. Selects the TV input for
Zone 2. Selects the TV input for
the Record Zone. Sets the AUDIO CONTROLS
menu LOUDNESS parameter
to ON.