JVC GC X 1 - Manual (Page 41)

EN
41
CAMERA SETTING
W. BALANCE
SENS.
TELEPHOTO
M. DRIVE
AE/AF
CLEAR
AUTO
80
2X
OFF
MULTI
EXE
4,5
1
OFF
M
4 SET
V
7,8 3,6
Changing the Zoom Power While Shooting
Depending on the image size, it is possible to enlarge a subject without sacrificing the current image quality.
Because the zoom power cannot be changed in some instances if the image is large, reduce the image size
(
੬ pg. 28) before changing the zoom power.
1 Turn the Power dial to “M”.
•Hold the Lock button down while turning the
Power dial.
2 Select “MANUAL” with the MODE switch.
•“MANUAL” appears on the LCD panel.
3 Press the DSP button until the CAMERA
SETTING screen appears.
4 Press the r t button to select “TELEPHOTO”.
5 Press the w e button to select “2X” or “3.2X”.
•The zoom powers that can be selected
depend on the image size.
2032 x 1536: 1X
1024 x 768: 1X/2X
640 x 480: 1X/2X/3.2X
6 Press the DSP button to turn off the menu
screen.
7 Point the lens at the subject and half-press the
Shutter button.
•The camera will continue to focus on the
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
8 Press the Shutter button all the way to take
the picture.
2