JVC GC X 1 - Manual (Page 69)

EN
69
Installing the USB Driver
For details on the basic operation of Windows ® 98, refer to the
instruction manual provided with your computer or Windows ®
98.
Preparation
Start Windows
® 98.
● If you are running other software, close that software. (Make
sure that there are no other application icons open on the
task bar.)
1 Turn the Power dial to “B”.
•Hold the Lock button down while turning the Power
dial.
2 Select “USB MODE” with the MODE switch.
•“USB MODE” appears on the LCD panel.
3 Connect the camera to the computer using the provided
USB cable. (
੬ pg. 68)
•The “Add New Hardware Wizard” window will appear.
4 Load the provided CD-ROM to the CD-ROM drive.
5 Click the “Next” button.
6 Click the “Next” button.
7 Confirm that “CD-ROM drive” has been checked, then
click the “Next” button.
•When the loaded CD-ROM is not found, click “Browse”
button and select the provided CD-ROM.
8 Click the “Next” button.
9 Click the “Finish” button.