JVC GC X 1 - Manual (Page 42)

42
EN
1
2
3,6
4,5 7,8
OFF
M
4 SET
V
CAMERA SETTING
W. BALANCE
SENS.
TELEPHOTO
M. DRIVE
AE/AF
CLEAR
AUTO
80
1X
ON
MULTI
EXE
Shooting Continuous Photos
With this mode you can shoot 2 continuous photos.
1 Turn the Power dial to “M”.
•Hold the Lock button down while turning the
Power dial.
2 Select “MANUAL” with the MODE switch.
•“MANUAL” appears on the LCD panel.
3 Press the DSP button until the CAMERA
SETTING screen appears.
4
Press the r t button to select “M. DRIVE”.
5 Press the w e button to select “ON”.
6 Press the DSP button to turn off the menu
screen.
7 Point the lens at the subject and half-press the
Shutter button.
•The camera will continue to focus on the
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
• To display the image on the LCD screen
while shooting, press the DSP button.
8 Press the Shutter button all the way for over
1 second to take the picture.
• If the flash is set, it will only flash for the first
photo.
NOTES:
● It is not possible to shoot continuous photos if the
uncompressed picture quality is selected.
● The picture appears dark when shooting at dark
location inside a room, etc.
MANUAL SHOOTING (cont.)