JVC GC X 1 - Manual (Page 68)

68
EN
DIGITAL
SOFTWARE SECTION FOR Windows ®
Operating Environment
The host computer that runs the Windows ®
operating environment must satisfy the following
conditions.
USB Driver
1. Microsoft
® Windows ® 98/Windows ® 98 Second
Edition, pre-installed
2. Available USB port
3. CD-ROM drive
Video Player
1. CPU: Intel
® Pentium ® 200MHz class or higher
2. Microsoft ® Windows ® 95/Windows ® 98
3. Display capability of 65,536 colors or more
4. CD-ROM drive
5. Minimum RAM requirement: 32MB
6. Minimum hard disk space requirement: 1MB
* The system requirements information is not a
guarantee that provided software applications will
work on all personal computers meeting those
requirements.
* Microsoft ® , Windows ® are either registered
trademarks or trademarks of Microsoft corporation
in United States and/or other countries.
* Intel ® , Pentium ® are registered trademarks of Intel
corporation.
* Other trademarks are property of their respective
owners.
* If you use Windows ® 95 or a personal computer
which does not have a USB port, use an optional
flash path, conversion card adapter, etc. For
details on the operating environment of these
devices, contact the dealers or manufacturers.
NOTES:
● Additional information regarding setup and
information not contained in the instruction
manual can be found in the file readme.txt. Please
read this file before installing the accompanying
software.
● The sound is not included in the video file
recorded with this camera.
USB Connection
Digital output
connector
To USB
connector
USB cable
(provided)
Windows ® PC
NOTES:
● Make sure to use the provided AC adapter (AA-
V37) to power the camera, when using camera
connected to a personal computer.
● When connecting the provided USB cable, make
sure to confirm the shape of the plug.
● When connecting the camera to a personal
computer via a USB cable, the personal computer
is sometimes unable to recognize the device that
is connected. Therefore, first turn both the camera
and the personal computer on, and then connect
the USB cable.