JVC GC X 1 - Manual (Page 43)

EN
43
1
2 3,6 4,5
OFF
M
4 SET
V
CAMERA SETTING
W. BALANCE
SENS.
TELEPHOTO
M. DRIVE
AE/AF
CLEAR
AUTO
80
1X
OFF
SPOT
EXE
Changing the AE/AF Area
Normally, in this camera this setting is “MULTI” in order to prevent the subject from being out of focus while
the background is in focus. If the camera does not focus on the point that you want it to, change this setting
to “SPOT”.
1 Turn the Power dial to “M”.
•Hold the Lock button down while turning the
Power dial.
2 Select “MANUAL” with the MODE switch.
•“MANUAL” appears on the LCD panel.
3 Press the DSP button until the CAMERA
SETTING screen appears.
4 Press the r t button to select “AE/AF”.
5 Press the w e button to select “SPOT”.
6 Press the DSP button to turn off the menu
screen.
NOTE:
MULTI: A precise exposure setting is made by
dividing the scene into several sections and
then measuring the light in each section.
SPOT: The exposure is set by measuring the light
in a small spot in the center of the scene.
Use this mode when you want to shoot a
subject with a large difference between
dark and bright area, such as someone on a
skihill, or someone standing in a spotlight
in a darkened theater.
● If “SPOT” is selected for shooting, press the DSP
button until “ ” appears on the LCD screen.