0 general electrical safety instructions, 0 power requirements – Jacuzzi J - 355 User Manual

Page 16

Advertising
background image

12

J-300 Series

5.0 General electrical safety Instructions

Your new Jacuzzi® spa is equipped with a “state-of-the-art”

equipment system. It contains the most advanced safety

and self-protective equipment in the industry.

Nonetheless, this spa must be installed properly to insure

dependable usage. Please contact your dealer or local building

department should you have any questions regarding your installation.

Proper grounding is extremely important. Jacuzzi spas are equipped with

a current collector system. A pressure wire connector is provided on the

surface of the control box, located outside the equipment door (Figure

B, page 17) to permit connection of a bonding wire between this point

and any ground metal equipment, metal water pipe or conduit within 5

feet (1.5m) of the spa, or copper clad grounding rod buried within 5 feet

(1.5m) of the spa. Bonding wire must be at least No. 8 AWG (8.4 mm²)

solid copper wire. This is a most important safety assurance feature.

Before installing this spa, check with the local building department to

insure installation conforms to local building codes.

120/240 volt Convertible Models

A spa connected to a 120 VAC electrical service must be located close

enough to a grounded, grounding-type electrical outlet so that the

included 10 feet (3m) power cord can be plugged directly into it.

Do noT

use an eXTensIon CorD as this could cause damage to the spa’s

equipment due to insufficient voltage. The power supplied to this spa

must be a dedicated circuit with no other appliances or lights sharing the

power provided by the circuit.

6.0 power requirements

Jacuzzi® spas are designed to provide optimum

performance and flexibility of use when connected to the

maximum electrical service listed below. Minor circuit

board modifications can be performed to allow your new

spa to accept an electrical service other than the factory

operation setting.

note: Refer to pages 42-45 for circuit board configuration details or

contact your authorized Jacuzzi dealer.

12

Advertising
This manual is related to the following products: