S (a pg. 14) – JVC SP-THS55F User Manual

Page 17

Advertising
background image

Masterpage:Right+

Filename [TH-R1R3EU_05Name.fm]

Page 14Monday, 28 March 2005 21:23

INSTALLING YOUR NEW UNIT

14

CAUTIONS:

When you connect speakers other than the supplied ones, use
speakers of the same speaker impedance (SPEAKER
IMPEDANCE) indicated near the speaker terminals on the rear of
the powered subwoofer.

DO NOT connect more than one speaker to one speaker
terminal.

Precautions for daily use

When moving the speakers, do not pull the speaker cords;
otherwise, the speakers may fall over, causing damage or injury.

Do not reproduce sounds at so high a volume that they are
distorted; otherwise, the speakers may be damaged by internal
heat build-up.

When holding a speaker, always grasp the lower portion. (TH-R3)

Do not lean against the speakers, as the speakers could fall
down or break, possibly causing an injury. Especially make sure
that children do not lean against them. (TH-R3)

Connecting The Satellite (Front, Centre, Surround) Speakers

4

16

TH-R3

4

16

TH-R1

Before connecting the speaker cords;
Twist and pull the insulation coat off and remove.

Front speakers
SP-THS55F

Powered subwoofer SP-PWR1

Centre speaker SP-THS55C

Surround speakers
SP-THS55S

Connect the black cords to the black (G) terminals.

Connect the white cords to the (F) terminals
referring to the table below:

FRONT SPEAKERS (LEFT)

White

FRONT SPEAKERS (RIGHT)

Red

CENTRE SPEAKER

Green

SURROUND SPEAKERS (LEFT)

Blue

SURROUND SPEAKERS (RIGHT)

Grey

Speaker cord

Centre speaker
SP-THS66C

Surround speakers
SP-THS66S

Front speakers
SP-THS66F

Powered subwoofer
SP-PWR3

White

Black

Black

Red

4 m

10 m

The satellite speakers are equipped with their speaker cords attached directly to their speaker unit instead of
having speaker terminals on their cabinet.

4 m

10 m

4 m

4 m

TH-R1R3EU_00.book Page 14 Monday, March 28, 2005 9:23 PM

Advertising
This manual is related to the following products: