T-v link functions, Initial settings – JVC SP-THS55F User Manual
Page 22
 
INITIAL SETTINGS
Page 19Monday, 28 March 2005 21:23
Filename [TH-R1R3EU_05Name.fm]
Masterpage:Left+
19
Results Of Auto Set Up/Preset Download Appearing 
On The Front Display Panel
If both Auto Channel Set and 
Auto Clock Set have been 
performed successfully, the 
correct current time is displayed.
Turn on the TV and select an input mode such as EXT1, then make 
sure that all necessary stations have been stored in the unit’s 
memory by using the PR +/– button(s).
●
If station names (ID – A pg. 91) have also been stored in the 
unit’s memory, the station name will be displayed at the top right 
corner of the TV screen for about 5 seconds when the unit is 
tuned to a different station.
●
If you want to set the tuner manually such as to add or skip 
channels, to change channel positions, or to set or change 
station names, see pages 80 and 81.
If Auto Channel Set has 
succeeded but Auto Clock Set 
has not, 
APR1B (channel
position) is displayed.
OR
If both Auto Channel Set and Auto Clock Set have failed, 
A- - : - -B is displayed.
A Turn on the TV and select an input mode such as EXT1, then
make sure that all necessary stations have been stored in the 
unit’s memory by using the PR +/– button(s).
●
If station names (ID – A pg. 91) have also been stored in the 
unit’s memory, the station name will be displayed at the top right 
corner of the TV screen for about 5 seconds when the unit is 
tuned to a different station.
●
If you want to set the tuner manually such as to add or skip 
channels, to change channel positions, or to set or change 
station names, see pages 80 and 81.
B Perform AClock SetB (A pg. 82).
ATTENTION:
After making sure the cables are connected properly, turn off the 
unit’s power once, then turn the unit’s power back on again.
The Country Set display appears on the TV screen. Perform 
B (A pg. 17) or APreset DownloadB (A pg. 18) again.
IMPORTANT:
●
To check if the Guide Programme numbers have been set 
correctly, perform the S
HOW
V
IEW
Timer Programming. (A pg. 49)
●
In certain reception conditions, station names may not be stored 
correctly, and Auto Guide Programme Number Set may not work 
properly. If the Guide Programme numbers are not set properly 
when you timer record a TV programme using the S
HOW
V
IEW
system, the unit will record a TV programme of a different station. 
When programming the timer using the S
HOW
V
IEW
system, be
sure to check the desired channel is selected correctly. 
(A pg. 49)
●
Your unit memorises all detected stations even if reception of 
some of them is poor. You can delete those stations with an 
unacceptable picture. (A pg. 80, 
INFORMATION
Language for the on-screen display
The language for the on-screen display will be set automatically 
when the Country setting has been made in step 2 of 
B on page 17 (unless you have selected ABELGIUMB or
ASUISSEB), as shown below.
If you want to change the language setting manually, see
Just Clock
Your unit is equipped with the Just Clock function which provides 
accurate time keeping through automatic adjustments at regular 
intervals, by reading data from a PDC signal. If you want to take 
advantage of this function, simply set 
AJUST CLOCKB to AONB.
T-V Link Functions
When you connect the unit to your TV via a fully-wired 21-pin 
SCART cable (A pg. 11), the following functions are available. You 
can use these functions only with a TV offering T-V Link, etc.*
For details, refer to the instruction manual of your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK,
Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable. The degree 
of compatibility and available functions may differ by system.
TV Auto Power On
The TV will turn on and be set to an input mode such as EXT1 
automatically whenever you start playback.
For details, refer to the instruction manual of your TV.
Unit Auto Standby
You can use your TV’s remote control to turn off the unit.
For details, refer to the instruction manual of your TV.
Direct Rec
You can easily start recording the programme that you are 
watching on your TV. When you use this function, set 
ADIRECT
REC
B to AONB. (A pg. 75)
SUOMI
B
SUOMI
ITALIA
B
ITALIANO
PORTUGAL
B
ENGLISH
MAGYARORSZÁG
B
ENGLISH
DEUTSCHLAND
B
DEUTSCH
ESPAÑA
B
ESPAÑOL
POLSKA
B
ENGLISH
NEDERLAND
B
NEDERLANDS
NORGE
B
NORSK
GREECE
B
ENGLISH
SVERIGE
B
SVENSKA
OTHER WESTERN
B
ENGLISH
DANMARK
B
DANSK
ÖSTERREICH
B
DEUTSCH
OTHER EASTERN
B
ENGLISH
ČESKÁ 
REPUBLIKA
B
ENGLISH
TH-R1R3EU_00.book Page 19 Monday, March 28, 2005 9:23 PM