A pg. 23, Asetting the speaker distanceb (a pg. 23), Setting the speaker distance – JVC SP-THS55F User Manual
Page 26: Initial settings
 
INITIAL SETTINGS
Page 23Monday, 28 March 2005 21:23
Filename [TH-R1R3EU_05Name.fm]
Masterpage:Left+
23
There is a time limit when performing the following setting. If the 
time is up before completing the setting, re-perform from the 
beginning.
Setting The Speaker Distance
●
This operation is not necessary if the Smart Surround Setup is 
successful.
●
By setting the distance, the unit automatically sets the delay time 
of each speaker such that sound from each speaker can be 
heard at the same time.
1
Press SETTING.
The item of the setting performed most recently is displayed on 
the front display panel.
2
Press
F or G to display the speaker setting on the front display
panel.
3
Press selection keys to select the distance.
Each time you press 
D or E, the speaker distance changes
from 0.3 m to 9.0 m in 0.3 m interval.
4
Repeat steps 2 - 3 as necessary.
●
Turn on the unit.
●
Turn on the TV and select an input mode such as EXT1.
●
Set the remote control selector switch to AUDIO.
●
Press DVD on the remote control.
1
2
3
4
5
6
7
8
9
0
VOL
SAT
TV
AUDIO
DVD
(FGDE)
ENTER
SETTING
Selection Keys
Speaker 
distance
Changes in the order of 
FRNT LNFRNT RNCENTER
NSURR LNSURR R.
CENTRE
FRNT
L
FRNT
R
SURR
L
SURR
R
Set the distance as follows for the above case:
●
Front speaker
3.0 m
●
Centre speaker
3.0 m
●
Surround speaker
2.7 m
2.1m
2.4m
2.7m
3.0m
3.3m
TH-R1R3EU_00.book Page 23 Monday, March 28, 2005 9:23 PM