John Lewis JLBIDO911 - Manual (Page 10)

The timer
Key
1. Time indicator neon
2. Cook time indicator neon
3. End time indicator neon
4. Countdown indicator neon
5. Decrease control
6. Increase control
7. Time Functions
Important! The time of day must be set
before the main oven will operate manually.
To set the time of day
The oven has a 24 hour clock.
When the electricity supply is first switched
on, the display will show 12:00 and the 'Time'
indicator neon will flash.
To set the correct time press the increase
control button and if necessary, the decrease
control button until the correct time on the
24 hour clock is reached. The 'Time' indicator
neon will flash for 5 seconds and then go out.
Important! The increase and decrease
control buttons operate slowly at first, and
then more rapidly. They should be pressed
separately.
To set the countdown
The 'Countdown' gives an audible reminder
at the end of any period of cooking.
This cooking period may be up to 2 hrs 30
mins. It is not part of the automatic control.
To set, press the Time Functions button until
the 'Countdown' indicator neon is illuminated
and the display reads 0:00.
To set the required time duration, press the
increase control until the display indicates the
interval to be timed. If necessary press the
decrease control to achieve the correct time
interval.
Important! This must be completed within
5 seconds of first pressing the Time Functions
button.
During the operation of the 'Countdown', the
remaining time period will be shown in the
display.
The 'Countdown' will sound intermittently for
up to 2 minutes at the end of the timed period.
The sound can be stopped by pressing any
button.
To cancel the countdown
If you change your mind and want to cancel
the 'Countdown', press the Time Functions
button until the 'Countdown' indicator neon
flashes then depress the decrease control until
0:00 shows in the display.
The 'Countdown' indicator neon will continue
to flash for a few seconds and then return to
the time of day.
10