John Lewis JLBIDO911 - Manual (Page 21)

Things to note
• The oven light will illuminate.
• The heat indicator neons will scroll until the
oven has reached the desired temperature
and then stop, an audible signal will sound.
When the oven has been switched off the
bars that are still lit indicate the remaining
residual heat in the oven.
• If it is necessary to reach the required
temperature in a shorter time, the Fast
heat-up function can be used. See Fast heat-
up function section.
• The cooling fan for the controls may
operate after a time.
• Some internal noise may be heard during
operation. This is quite normal.
• The oven fan will turn on and off during use.
Low temperature
cooking
With the Low Temperature Cooking
Function, meat becomes tender and remains
particularly succulent.
We recommend Low Temperature Cooking
for lean, tender pieces of meat and fish.
The oven heats up to the selected preset
temperature.
When this temperature is reached, an audible
signal sounds. Then the oven switches
automatically to a lower temperature to
continue the cooking.
Low Temperature Cooking is not suitable for
pot roast, fatty roasts, pork or chicken.
Always cook dishes uncovered without a lid.
Using main oven low
temperature cooking
• Thoroughly sear the meat in a pan over a
very high heat.
• Low Temperature cooking cannot be used
together with the timer functions Cook
Time and End Time .
• Place in a roasting dish or directly on the
shelf with a tray underneath to catch the fat.
Place into the cold oven.
• The oven must be switched on before
setting any cooking function or
programme.
• Press the Oven Select Button until the main
oven cavity indicator is illuminated.
• Press the Function selector until the
required setting is illuminated.
• Wait 5 seconds until your choice is
confirmed. The temperature will
automatically set to 120°C.
• If you wish to alter the set temperature, you
may do so by pressing or until the required
temperature setting is reached. You can
only select a temperature between 120°C
and 150°C.
• To switch off a function press the Function
selector once. The function neon will go
out and the display will return to the time
of day.
Things to note
• The oven light will illuminate.
• The heat indicator neons will scroll until the
oven has reached the desired temperature
and then stop, an audible signal will sound.
When the oven has been switched off the
bars that are still lit indicate the remaining
residual heat in the oven.
• The cooling fan for the controls may
operate after a time.
• Some internal noise may be heard during
operation. This is quite normal.
21