John Lewis JLBIDO911 - Manual (Page 15)

• If it is necessary to reach the required
temperature in a shorter time, the Fast
heat-up function can be used. See Fast heat-
up function section.
• The cooling fan for the controls may
operate after a time.
• Some internal noise may be heard during
operation. This is quite normal.
Warning! Do not place dishes, tins
and trays directly on the oven base as
it becomes very hot and damage will
occur.
Warning! Do not place cookware
and cooking pots with rough bases e.g.
cast iron on the oven door as damage
to the glass may occur.
Top oven base heat
finishing
This function uses the lower element to give
single level cooking. This is particularly suitable
for dishes which require extra base browning
such as pizzas, quiches and flans.
Using top oven base heat
finishing
• The oven must be switched on before
setting any cooking function or
programme.
• Press the Oven Select Button until the top
oven cavity indicator is illuminated.
• Press the Function selector until the
required setting is illuminated.
• Wait 5 seconds until your choice is
confirmed. The temperature will
automatically set to 150°C.
• If you wish to alter the set temperature, you
may do so by pressing or until the required
temperature setting is reached.
• To switch off a function press the Function
selector once. The function neon will go
out and the display will return to the time
of day.
Things to note
• The oven light will illuminate.
• The heat indicator neons will flash until the
oven has reached the desired temperature
and then stop, an audible signal will sound.
When the oven has been switched off the
bars that are still lit indicate the remaining
residual heat in the oven.
• The cooling fan for the controls may
operate after a time.
• Some internal noise may be heard during
operation. This is quite normal.
Warning! Do not place dishes, tins
and trays directly on the oven base as
it becomes very hot and damage will
occur.
Top oven keep warm
This setting allows you to warm plates or keep
warm pre-cooked dishes prior to serving.
Using top oven keep
warm
• The oven must be switched on before
setting any cooking function or
programme.
• Press the Oven Select Button until the top
oven cavity indicator is illuminated.
• Press the Function selector until the
required setting is illuminated.
• Wait 5 seconds until your choice is
confirmed. The temperature will
automatically set to 80°C.
15