John Lewis JLBIDO911 - Manual (Page 19)

• The heat indicator neons will scroll until the
oven has reached the desired temperature
and then stop, an audible signal will sound.
When the oven has been switched off the
bars that are still lit indicate the remaining
residual heat in the oven.
• If it is necessary to reach the required
temperature in a shorter time, the Fast
heat-up function can be used. See Fast heat-
up function section.
• The cooling fan for the controls may
operate after a time.
• Some internal noise may be heard during
operation. This is quite normal.
Warning! Do not place cookware
and cooking pots with rough bases e.g.
cast iron on the oven door as damage
to the glass may occur.
Main oven pizza
This setting can be used for foods such as pizza
where base browning and crispness are
required.
The upper and lower elements operate in
conjunction with the oven fan.
Using main oven pizza
• The oven must be switched on before
setting any cooking function or
programme.
• Press the Oven Select Button until the main
oven cavity indicator is illuminated.
• Press the Function selector until the
required setting is illuminated.
• Wait 5 seconds until your choice is
confirmed. The temperature will
automatically set to 200°C.
• If you wish to alter the set temperature, you
may do so by pressing or until the required
temperature setting is reached.
• To switch off a function press the Function
selector once. The function neon will go
out and the display will return to the time
of day.
Things to note
• The oven light will illuminate.
• The heat indicator neons will scroll until the
oven has reached the desired temperature
and then stop, an audible signal will sound.
When the oven has been switched off the
bars that are still lit indicate the remaining
residual heat in the oven.
• If it is necessary to reach the required
temperature in a shorter time, the Fast
heat-up function can be used. See Fast heat-
up function section.
• The cooling fan for the controls may
operate after a time.
• Some internal noise may be heard during
operation. This is quite normal.
Main oven conventional
cooking
You may need to preheat your conventional
oven.
To do this simply set your oven as below and
wait for the main oven temperature neon to
stop flashing before putting your food inside
the oven.
Using main oven
conventional cooking
• The oven must be switched on before
setting any cooking function or
programme.
• Press the Oven Select Button until the main
oven cavity indicator is illuminated.
• Press the Function selector until the
requires setting is illuminated.
19