JVC RM-P2580 - Manual (Page 14)

14
The AUTO PAN operation consists of low-speed horizontal movement of a camera between preset positions
at a constant time interval.
Automatic panning is set between 2 points.
This function can be set on individual cameras.
2. BASIC OPERATIONS
AUTO PAN OPERATION
1.
Press the AUTO PAN button. The LED indicator lights up
and the AUTO PAN operation starts.
The POSITION display shows “
A
” at this time.
2.
To stop the AUTO PAN operation, press the AUTO PAN
button again.
NOTE
During the AUTO PAN operation, the PAN/TILT control
lever can be operated only in the TILT direction (
).
NOTES
●
The AUTO PAN operation also stops when a preset
position is selected or the AUTO PATROL operation
is started.
REF. : “POSITION SELECTION” on Page 11 and
“AUTO PATROL OPERATION” on page 15.
● The AUTO PAN operation is set on the CAMERA
SCREEN ( REF. : Page 28). Open the camera menu
screen to perform the setting.
As the rest of the setting procedure is variable de-
pending on the camera models, please refer to the
Instruction manual of the connected camera.
SETUP SETUP
MENU MENU SET SET
SPEED SPEED
IRIS IRIS
AF AF
FOCUS FOCUS
ZOOM ZOOM
OPEN OPEN
FAR FAR
TELE TELE CLEAR CLEAR
/HOME /HOME
7
4
1
8
0
5
2
9
6
3
ENTER ENTER
AUTO AUTO
PAN PAN
OPTION OPTION
1
OPTION OPTION
2
CAMERA CAMERA POSI- POSI-
TION TION
AUTO AUTO
PATROL PATROL
CLOSE CLOSE
NEAR NEAR
WIDE WIDE
AUTO AUTO F-1 F-1 F-2 F-2 F-3 F-3
PAN/TILT PAN/TILT LENS LENS CAMERA/POSITION
CAMERA CAMERA POSITION POSITION
REMOTE CONTROL UNIT REMOTE CONTROL UNIT RM-P2580 RM-P2580
ALARM ALARM
PO POWER WER
KEY LOCK KEY LOCK
AUTO PAN
button PAN/TILT
control lever
POSITION display SET button