JVC RM-P2580 - Manual (Page 26)

26
MENU OPERATION
5. MENU SCREEN SETUPS
1.
Set the POWER switch on the rear panel to “ON”.
2.
Press and hold the MENU button for about 3 seconds.
The LED indicator lights up and the MONITOR OUTPUT
1 connector on the rear panel outputs the SETUP screen
signal.
3.
Select a menu item by moving the cursor (>) using the
PAN/TILT control lever.
• Tilt the lever upwards (
8 ) to move the cursor upwards.
• Tilt the lever downwards ( 9 ) to move the cursor down-
wards.
4.
Press the SET button to display the sub-menu of the menu
item selected.
NOTES : While the menu screen is being displayed :
● The functions of AUTO SEQUENCE, AUTO PAN and
AUTO PAN cease to operate.
● The alarm functions are disabled.
●
The CAMERA SW is disabled.
●
Remaining in operation are camera select, preset (home)
position select, data output and manual control.
7.
After changing the items as required, press te MENU but-
ton to return to the normal video display screen.
NOTE
For details off the sub-menu setting procedure, see subse-
quent pages.
5.
As in step 3 , select the desired item in the sub-menu.
6.
Change the value of the selected item using the PAN/TILT
control lever.
• Tilt the lever towards the left (
; ) to decrease the value.
• Tilt the lever toward the right ( : ) to increase the value.
When the value of an item is changed, the marking ( ✽ )
appears as shown on the left.
NOTE
The items which have “..” at the end have the sub-menus
under them.
SETUP SETUP
MENU MENU SET SET
SPEED SPEED
IRIS IRIS
AF AF
FOCUS FOCUS
ZOOM ZOOM
OPEN OPEN
FAR FAR
TELE TELE CLEAR CLEAR
/HOME /HOME
7
4
1
8
0
5
2
9
6
3
ENTER ENTER
AUTO AUTO
PAN PAN
OPTION OPTION
1
OPTION OPTION
2
CAMERA CAMERA POSI- POSI-
TION TION
AUTO AUTO
PATROL PATROL
CLOSE CLOSE
NEAR NEAR
WIDE WIDE
AUTO AUTO F-1 F-1 F-2 F-2 F-3 F-3
PAN/TILT PAN/TILT LENS LENS CAMERA/POSITION
CAMERA CAMERA POSITION POSITION
REMOTE CONTROL UNIT REMOTE CONTROL UNIT RM-P2580 RM-P2580
ALARM ALARM
PO POWER WER
KEY LOCK KEY LOCK
PAN/TILT
control lever
MENU button
SET button
SETUP
POSITION SETUP..
CAMERA..
CONTROL UNIT..
Item Sub-menu available Cursor
SETUP screen (Main menu)
Example of sub-menu screen
(Displayed at A Mode Only)
Example of sub-menu screen after change
(Displayed at A Mode Only)
Change marking
OPTION
P/T SPEED 8STEP
CAMERA SELECTION..
FACTORY SETTING..
OPTION
P/T SPEED 8STEP
CAMERA SELECTION..
FACTORY SETTING..