JVC RM-P2580 - Manual (Page 30)

33
6. OTHER
TROUBLESHOOTING
Check
• Is the power supply connected properly to all off the cameras?
• Are the cameras connected properly to the VIDEO INPUT connectors?
• Are the camera heads compatible with this unit?
• Preset their home positions.
• Are the cameras connected properly to the TO CAMERA connectors?
• Are the DIP switches on the cameras set properly? ( REF. : Instruction
manuals of the cameras in use.)
• Is the unit in the KEY LOCK status?
• Are the cameras connected properly to the TO CAMERA connectors?
• Are the DIP switches of the cameras set properly? ( REF. : Instruction
manuals of the cameras in use.)
• Is the unit in the KEY LOCK status?
• Are the camera IDs set to match correctly the VIDEO INPUT connector
numbers?
• Is MAX CAMERA set to match the number of connected cameras?
• Is CAMERA SELECTION set to a position other than DISABLE?
• Have positions been preset?
• Is P/T SPEED set as required?
• Is the terminal (one of the DATA I/O terminals) where the alarm signal is
input properly set and connected?
• Are items ALARM TEXT and BUZZER TIME set to NONE?
Symptom
Video is not displayed.
The cameras cannot be
initialized.
The cameras point in arbi-
trary directions after initiali-
zation.
None of the remote control
function operate.
The PAN/TILT or lens con-
trols cannot be operated
manually.
The video signal from a
camera does not appear
when the camera is se-
lected.
The camera does not
move to the position se-
lected.
The speed of camera
movement when using the
PAN/TILT control is too
slow.
Alarm operation does not
occur when an alarm sig-
nal is input.
The alarm text is not dis-
played and/or buzzer does
not sound when an alarm
signal is input.
Ref. Page
Pages 21, 22
—
Page 27
Pages 21, 22
Page 15
Pages 21, 22
Page 15
Page 29
Page 29
Page 27
Page 29
Item “I/O” on page
30.
Page 31
Page 32
If the problem still cannot be solved after following the above checks, please consult your nearest authorised JVC service
agent.