JVC GR-DVX4 - Manual (Page 23)

EN
23
PAUSE
MANUAL
– – –
DEC 25 ’ 99
PM 5 : 30
6w
35 min
PS
444
REC
MANUAL
PL
AY
OFF CAMER
A
5S
FOCUS
EXPOSURE
AUTO
OFF
OFF
AUTO
AUTO
W. BALANCE
FADER
/ WIPE
P. AE
/ EFFECT
END
0 FLASH ADJ.
TO MODE MENU 4
– – – – – 6 – – – – –
REC MODE
WIDE MODE
OFF
40X
SP
ZOOM
GAIN UP
DIS
END
ON
AGC
ON
SELF-TIMER
TO DATE / TIME MENU
TO SYSTEM MENU
AUTO FLASH
4
Self-Timer
Once the camcorder is set, the camcorder operator can
become part of the scene in a more natural way, adding
the final touch to a memorable picture.
1 SELECT OPERATION MODE
Set the Operation Switch to “ ”. Then, set the
Power Switch to “ ” (or “5S”) while pressing
down the Lock Button. Pull out the viewfinder fully or
open the LCD monitor fully.
•You can tilt the LCD monitor upward to 180
degrees so that it faces forward and view yourself
while self-recording with the viewfinder pushed
back.
2 ACCESS RECORDING MENU
Press MENU/SET. The Recording Menu appears.
3
ACCESS MODE MENU
Move the highlight bar to “TO MODE MENU” by
rotating MENU/SET. Press it. The Mode Menu
appears.
4
SET SELF-TIMER
Move the highlight bar to “SELF-TIMER” by rotating
MENU/SET. Press it and the parameter is highlighted.
Rotate MENU/SET until “ON” appears. Press it twice
to exit from the Recording Menu.
5 ENGAGE SELF-TIMER MODE
Press START/STOP.
•After 15 seconds, the beep sounds and recording
starts.
6 STOP SELF-TIMER RECORDING
Press START/STOP.
•The camcorder re-enters Record-Standby mode.
7 END SELF-TIMER RECORDING
Set the Operation Switch to “ ” or set the Power
Switch to “OFF”. “SELF-TIMER” is automatically set
back to “OFF”.
To Take A Snapshot In The Self-Timer Mode. . .
.... in step 5, press SNAPSHOT instead of START/STOP.
After that, the camcorder enters the Record-Standby
mode.
Self-Timer
indication
After 15 sec.
When START/STOP or
SNAPSHOT is pressed,
the tally lamp changes
as shown:
Blinks quickly
(Self-Timer shoot-
ing starts soon) Stops blinking
and stays on
(Self-Timer
shooting starts) Begins blinking
(Self-Timer starts)
After approx. 15 sec.
¥ ¥
4
Operation Switch
Power Switch
START/STOP Button
Lock Button
Power lamp
Display
Recording Menu
Mode Menu
MENU/SET Dial
During recording