JVC GR-DVX4 - Manual (Page 56)

56
EN
T W
3
1
6
7 8 9 `
5
4
2
VCR BRAND
NAME BUTTONS
(A) (B)
6 2
6 4
7 7
MITSUBISHI
6 7
6 8
NEC
3 7
3 8
GRUNDIG 1 4
3 4
HITACHI 6 6
6 3
PANASONIC
1 3
1 7
1 1
9 4
1 8
JVC 9 1
9 6
9 3
BLAUPUNKT
AKAI
9 7
9 8
3 2 FERGUSON
1 3
SANYO
3 6
3 5
SHARP
1 5
1 `
TOSHIBA 6 9
6 1
SONY
6 5
6 `
3 9
3 1
THOMSON,
TELEFUNKEN,
SABA,
NORDMENDE
9 1
9 6
9 7
3 2
SELECO,
REX 9 1
9 6
PHILIPS
1 9
9 5
1 1
9 4
9 1
9 6
1 2
3 3
7 2
A
B
C
VCR CODE LIST
BUTTONS
(A) (B)
VCR BRAND
NAME
Random Assemble Editing [R.A.Edit]
Create edited videos easily using your camcorder as the
source player. You can select up to 8 “cuts” for automatic
editing, in any order you like. R.A.Edit is more easily
performed when the RM-V713U MBR (Multi-Brand
Remote,
੬
pg. 52) is set to operate with your brand of
VCR (see VCR CODE LIST), but can also be performed by
operating the VCR manually.
Before operation, make sure the lithium battery is installed
in the remote control RM-V713U (
੬
pg. 52).
SET REMOTE/VCR CODE
1
SET REMOTE TO OPERATE VCR
Turn off the power to the VCR and point the remote
towards the VCR’s infrared sensor. Then, referring to
the VCR CODE LIST on the left, press and hold MBR
SET, and press button (A) and then (B).
•The code is automatically set once you release MBR
SET, and the VCR’s power comes on.
2
OPERATE VCR
Make sure the VCR’s power is on. Then, while
holding SHIFT, press the button on the remote for the
desired function. The functions the remote can
control are PLAY, STOP, PAUSE, FF, REW and VCR
REC STBY (you do not need to press SHIFT for this
one).
You are now ready to try Random Assemble Editing.
IMPORTANT
Although the MBR is compatible with JVC VCRs and
those of many other makers, it may not work with yours
or may offer limited functions.
NOTES:
● If the VCR’s power does not come on in step 1, try
another code from the VCR CODE LIST.
● Some brands of VCR do not come on automatically. In
this case, turn the power on manually and try step 2.
● If the remote control is not able to control the VCR, use
the controls on the VCR.
● When the remote control's battery runs out, the VCR
brand you have set will be erased.
In that case, replace the old battery with a new one to
reset the VCR brand.
USING THE REMOTE CONTROL UNIT (cont.)
VCR (Recording deck)
RM-V713U
(provided)
SHIFT
MBR SET