JVC GR-DVX4 - Manual (Page 59)

EN
59
4
1 0 0 : 2 5 ~ 0 2 : 0 5 – –
2 0 7 : 1 8 ~ 0 8 : 3 1 – –
3 – – 0 3 : 3 3 ~ 0 5 : 5 3
4 0 9 : 3 0 ~ 1 3 : 1 5
5 1 5 : 5 5 ~ 1 6 : 2 0 – – – –
6 – – – – : – – ~
7 ~
8 ~
TIME CODE
I N OUT MODE
1 6 : 3 0
9 : 3 9 TOTAL
W H
B/W
P
P
T W
AUTOMATIC EDITING TO VCR
11
PREPARE SOURCE TAPE
Rewind the tape in the camcorder to the beginning of
the scene you want to edit and press PAUSE (6).
12 ENGAGE VCR'S RECORD-PAUSE MODE
Point the remote control towards the VCR’s remote
sensor and press VCR REC STBY (q6), or manually
engage the VCR’s Record-Pause mode.
13 START EDITING
Press START/STOP on the camcorder. Editing
proceeds as programmed, right through to the end of
the last registered scene.
•Pressing START/STOP on the remote control does
not start editing.
•When dubbing is complete, the camcorder enters
the Pause mode, and the recording deck enters its
Record-Standby mode.
•If you do not register an Edit-Out point, the tape will
be dubbed all the way to the end automatically.
1
14 STOP EDITING
Engage the Stop modes for the camcorder and the
VCR.
To make the R.A.Edit counter display disappear, press
R.A.EDIT ON/OFF on the remote control.
NOTES:
● Pressing R.A.EDIT ON/OFF on the remote control clears
all settings registered during Random Assemble Editing.
● When the editing cable is connected to the Pause
terminal during dubbing, make sure the remote control
is pointed at the VCR’s sensor, and that the path between
the two is unobstructed.
● Random Assemble Editing may not function properly
when using a tape including several duplicated Time
Codes (
੬
pg. 19).
START/STOP
Button
Pause (6) Button
Stop (5) Button
Rewind (2)
Button
RM-V713U
(provided)
EDIT IN/OUT
FADE/WIPE
R.A.EDIT
ON/OFF
PAUSE
Random Assemble
Editing Menu
VCR REC STBY CANCEL
Remote Sensor
EFFECT