Using the remote control unit, Cont.), Slow-motion playback – JVC GR-DVX4 User Manual

Page 54: Frame-by-frame playback, Playback zoom

Advertising
background image

54

EN

USING THE REMOTE CONTROL UNIT

(cont.)

T

W

PLA

Y

O

FF

C

A

M

ER

A5S

Press T

Normal playback

Left or SLOW
Rewind Button

To move image,
press

(Right)

while keeping
SHIFT held down.

RM-V713U

(provided)

PAUSE

Power Switch

PLAY

Zoom Buttons

SHIFT

Stop (5) Button

Play (4) Button

Remote sensor

FEATURE:

Slow-Motion Playback

PURPOSE:

To allow slow-speed search in either direction.

OPERATION:

1) To change from normal to Slow-Motion Playback, press

PAUSE (6) at the point where you want to start
playback in slow motion.

2) Press SLOW (9 or 0). After playing back for approx.

1 minute in Slow Rewind or approx. 2 minutes in Slow
Forward, normal playback resumes.

Ⅲ To stop Slow-Motion Playback in progess, press PLAY (4).

NOTES:

● During Slow-Motion Playback, due to digital image

processing, the picture may take on a mosaic effect.

● After SLOW (9 or 0) is pressed, the still image may be

displayed for a few seconds, then the screen may become
blue back for a few seconds. This is not a malfunction.

● There may be a small margin between the slow-motion

playback start point you chose and the start point at which
the camcorder actually begins playback in slow motion.

● During Slow-Motion Playback, there will be distur-

bances in video and the picture may seem unstable,
especially with steady images. This is not a malfunc-
tion.

● During Slow-Motion Playback, press PAUSE (6) to

pause playback.

FEATURE:

Frame-By-Frame Playback

PURPOSE:

To allow frame-by-frame search.

OPERATION:

1) To change from normal to Frame-By-Frame Playback,

press PAUSE (6) at the point where you want to start
Frame-By-Frame Playback.

2) Press PAUSE (6) repeatedly. Each time it is pressed, the

frame is played back.

FEATURE:

Playback Zoom

PURPOSE:

To magnify the recorded image up to 10X at any time
during playback.

OPERATION:

1) Press PLAY (4) to find the scene of interest.
2) Press the Zoom Buttons (T/W) on the remote control.

Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.

3) You can move the image on screen around to find a

particular portion of the picture. While holding down
SHIFT, press

(Left),

(Right),

(Up) and

(Down).

Ⅲ To end zoom, press and hold W until magnification returns

to normal. Or, press STOP (5) and then press PLAY (4).

NOTES:

● Zoom can also be used during slow-motion and still

playback.

● During digital image processing, the quality of the

image may suffer.

Right or SLOW
Forward Button

Up Button

Down Button

STOP

Advertising