JVC HR-S8700EU - Manual (Page 23)

Masterpage:Right-NoTitle0
EN
23
Filename [HRS8700EU1a.fm]
Page 23 July 20, 2000 4:30 pm
Next Function Memory
The Next Function Memory “tells” the recorder what to do after
rewinding. Before continuing, make sure the recorder is in the
Stop mode.
a- For Automatic Start Of Playback
Press 3 , then press 4 within 2 seconds.
b- For Automatic Power Off
Press 3 , then press 1 within 2 seconds.
c- For Automatic Timer Standby
Press 3 , then press # (TIMER) within 2 seconds.
Digital TBC/NR
Your recorder is equipped with the Digital TBC (Time Base
Corrector) that removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes and rental cassettes.
The on/off of Digital 3-DNR (Noise Reduction) which cuts noise
and enables clear picture reproduction is also linked to this
function.
* The default setting is on.
We recommend that you use Digital TBC/NR when...
... playing back a tape recorded on a camcorder.
... playing back a tape repeatedly used.
... using this video recorder as the source player for editing.
Activate Digital TBC/NR.
Press DIGITAL TBC/NR so that the button lights up.
● To turn off Digital TBC/NR, press DIGITAL TBC/NR again so
that the light goes off.
NOTES:
● If you play back a tape recorded under poor TV reception
condition, the picture may become more stable with Digital
TBC/NR set to off.
● When Digital TBC/NR is set to on, if you play back a tape
where certain types of signals are recorded (using a PC or
some character generators), the playback picture may be
distorted. If this is the case, turn off Digital TBC/NR.
● When playing back a MESECAM tape, Digital TBC/NR does
not function even though the DIGITAL TBC/NR button is lit.
Repeat Playback
Your recorder can automatically play back the whole tape 100
times repeatedly.
1 Start playback.
Press 4 .
2 Activate Repeat Playback.
Press 4 and hold for over 5 seconds, then release.
● The Play indicator ( u
) on the front display panel blinks
slowly.
● After playing back a tape 100 times, the recorder stops
automatically.
3 Stop Repeat Playback.
Press 8 at any time.
● Pressing 4
,
3
,
5
or
9
also stops Repeat Playback.
NOTE:
Repeat playback is not possible with a cassette recorded in EP
mode.
Manual Tracking
Your recorder is equipped with automatic tracking control.
During playback, you can override this and adjust the tracking
manually by pressing the PR buttons.
1 Override automatic tracking.
Press p on the remote control.
2 Adjust the tracking manually.
Press PR + or –.
3 Return to automatic tracking.
Press p on the remote control.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
Soundtrack Selection
Your recorder is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing AUDIO changes the soundtrack as follows:
NOTES:
● “ a + s ” should normally be selected. In this mode, Hi-Fi
stereo tapes are played back in stereo, and the normal audio
track is played back automatically for tapes with only normal
audio.
● For instructions on recording stereo and bilingual programmes,
refer to page 28.
● “O.S.D.” must be set to “ON” or the on-screen displays will
not appear (
੬
pg. 65).
TRACK
USE
Recorder’s Front
Display Panel
On-Screen
Display
a + s
HI FI
L
j h
R
For Hi-Fi stereo
tapes
a
HI FI
L
j
For main audio of
Bilingual tapes
s
HI FI
h
R
For sub audio of
Bilingual tapes
NORM NORM
For audio-dubbed
tapes
a + s + NORM
HI FI
NORM
For audio-dubbed
tapes
HRS8700EU1a.fm Page 23 Thursday, July 20, 2000 4:30 PM