Make connections, Set the recorder’s input mode, Locate the start point – JVC HR-S8700EU User Manual

Page 55: Engage the audio dubbing mode, Start dubbing, End audio dubbing

Advertising
background image

Masterpage:Right-NoTitle0

EN

55

Filename [HRS8700EU3.fm]

Page 55

July 20, 2000 4:32 pm

A

Make connections.

Connect an audio component to the AUDIO L + R input
connectors on the recorder’s front panel.

● When connecting a monaural audio component, use only the

recorder’s AUDIO L input connector.

B

Set the recorder’s input mode.

Press AUX (number key0”) and/or PR to select “F-1” or
“S-1”.

C

Locate the start point.

Press

4

to start playback of the tape in your recorder, and

press

9

when you reach the point where you want to start

dubbing.

D

Engage the Audio Dubbing mode.

Press A.DUB.

● Your recorder enters the Audio Dubbing Pause mode. (“

o

blinks, “

u

” and “

i

” light up on the front display panel.)

● To perform Audio Dubbing with audio mixing, press AUDIO

to select “

a

+

s

(L+R)” at this point.

* Audio Dubbing with audio mixing is not possible if you are using a

monaural audio component, or if you don’t have an audio mixer.

E

Start dubbing.

Engage the audio component’s Play mode, then press

4

to start the tape in your recorder; Audio Dubbing begins
at this point.

● “

o

” blinks and “

u

” is displayed on the front display panel.

● To stop dubbing temporarily, press

9

. Press

4

to resume

dubbing.

F

End Audio Dubbing.

Press

8

(or

0

) to stop the tape in your recorder, and

engage the audio component’s Stop mode.

NOTES:

When monitoring the sound during Audio Dubbing, the

normal soundtrack is automatically selected. If you wish to
hear the mixed sound (Hi-Fi + Normal soundtracks), press
AUDIO to select “

a

+

s

(L+R) + NORM” (

pg. 23).

Audio Dubbing stops automatically when the counter reaches

“0:00:00”, and the recorder enters the Play mode. Check the
counter reading before dubbing.

Audio Dubbing is also possible using the rear panel AV1 (L-1)

IN/OUT or AV2 (L-2) IN/DECODER connector. When using
these 21-pin SCART connectors, be sure to select the correct
input mode (“L-1” or “L-2”) in step 2.

Audio Dubbing is not possible with cassettes whose record

safety tab has been removed.

When playing back an audio-dubbed tape, press AUDIO to

select the soundtrack you wish to hear. (

pg. 23)

HRS8700EU3.fm Page 55 Thursday, July 20, 2000 4:32 PM

Advertising