JVC HR-S8700EU - Manual (Page 34)

Filename [HRS8700EU2.fm]
Masterpage:Left
34
EN
Page 34 July 20, 2000 4:31 pm
TIMER RECORDING (cont.)
Check, cancel and change programmes
A
Disengage the timer mode.
Press # (TIMER), then press 1 .
B
Access the Programme Check screen/display.
C
Access the Programme screen/display.
The front display panel shows the programme start time. Pressing
OK changes the display to the programme stop time, then the
date and the channel position.
To cancel or change a programme...
D
Cancel or change a programme.
Press & to cancel a programme. To change programme
settings, press the appropriate button: START+/–,
STOP+/–, DATE+/–, PR+/–, VPS/PDC and/or SP/LP/EP
(
p ).
● You can change “TV PROG” to “SAT” for the channel position
by pressing the number key “0”.
E
Return to the normal screen/display.
Press " as many times as necessary. If there are still
some programmes remaining, go on to step 6.
F
Return to the timer mode.
Press # (TIMER).
NOTE:
You can also check the programmes on the front display panel
even if the recorder’s power is off (unless the recorder is in the
Power Save mode
੬
pg. 66) or the recorder is in the Timer
mode; however, it is not possible to cancel or change the
programmes.
Press " .
Press " again to check
more information. Each time
you press
" , the next
programme’s information
appears.
HRS8700EU2.fm Page 34 Thursday, July 20, 2000 4:31 PM