JVC HR-S8700EU - Manual (Page 61)

Masterpage:Right-NoTitle0
EN
61
Filename [HRS8700EU3.fm]
Page 61 July 20, 2000 4:32 pm
Perfect Connections
This is an example of recommended connection if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector
if you have a decoder, AV1 (L-1) IN/OUT connector to
TV’s connector, and AV2 (L-2) IN/DECODER connector
to the satellite receiver’s connector. Then connect the
satellite receiver and TV.
NOTES:
● Set “L-2 SELECT” to “A/V” ( ੬
pg. 51).
● You can use Automatic Satellite Programme Recording
function (
੬
pg. 36) with this connection.
● To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key “0”) and/or PR so that
“L-2” appears on the front display panel.
● To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
● For details, refer to the instruction manual of the satellite
receiver and decoder.
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
21-pin SCART
connector
Back of TV
ANT. IN
RF OUT
Aerial
connector
Decoder
Mains outlet
Back of recorder
HRS8700EU3.fm Page 61 Thursday, July 20, 2000 4:32 PM