JVC HR-S8700EU - Manual (Page 7)

Masterpage:Right-NoTitle0
EN
7
Filename [HRS8700EU1.fm]
Page 7 July 20, 2000 4:29 pm
ON-SCREEN DISPLAY
When “O.S.D.” is set to “ON” (
੬
pg. 65), various operational indicators appear on the TV screen.
A Operation Mode Indicators
B Tape Speed SP/LP/EP
C Tape Direction
D Counter Display
E Tape Remaining Time Indicator
੬ pg. 25
F Audio Mode Display ੬ pg. 23
G Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press
3 or
5
from the Stop mode
or perform an Index Search
(
੬
pg. 22). The position of
“ q ” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
H Type of Broadcast ੬ pg. 28
I Current Day/Month/Year
J Clock Display
K Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1, S-1 or
SAT*)
* When “L-2 SELECT” is set to “SAT” (
੬
pg. 51), “SAT” appears
instead of “L-2”.
L Timer Warning Display
A warning appears on the TV screen to tell you that the
timer-recording is to start in 5 minutes if you’re not in the
Timer mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
&
on the remote control.
M “Cassette Loaded” Mark
Beginning End
HRS8700EU1.fm Page 7 Thursday, July 20, 2000 4:29 PM