Sony STR-DN2010 - Manual (Page 99)

99 GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right
STR-DN2010
4-182-049-11(1)
S-AIR Opera
tions
2
Press GUI MODE.
After “GUI ON” appears on the display
for a while, the GUI menu appears on the
TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
3
Press V/v repeatedly to select
“ Settings”, then press or
b.
The Settings menu list appears on the TV
screen.
4
Press V/v repeatedly to select
“S-AIR”, then press .
5
Press V/v repeatedly to select
“S-AIR Mode”, then press
or b.
6
Press V/v repeatedly to select
the setting you want, then
press .
• PARTY: The S-AIR receiver outputs
sound according to the input selected on
the S-AIR main unit.
• SEPARATE: You can select the input
you want for the S-AIR receiver while
the input of the S-AIR main unit remain
unchanged. When “SEPARATE” is
selected, you can only select “SA-CD/
CD”, “DMPORT”, “FM TUNER”,
“AM TUNER”, “SIRIUS”*,
“SERVER”, “Rhapsody”*,
“SHOUTcast” and the input that is
currently selected on the S-AIR main
unit.
* USA model only.
Note
When the input selected on the S-AIR
receiver is same as S-AIR main unit, the
input of the S-AIR receiver will change
according to the S-AIR main unit.
7
Press GUI MODE.
The GUI menu turns off.
8
Select the input you want on
the S-AIR receiver.
x When “PARTY” is set
The S-AIR receiver’s function changes
sequentially as you press INPUT
SELECTOR +/– on the receiver or
S-AIR CH of the S-AIR receiver.
x When “SEPARATE” is set
The S-AIR receiver’s function changes
by pressing S-AIR CH of the S-AIR
receiver.
Notes
• When “FM TUNER” or “AM TUNER” is
selected on the S-AIR main unit, you can only
select the same band for the tuner on the
S-AIR receiver. However, you can select
input other than TUNER on the S-AIR
receiver.
• When a network function (“SERVER” or
“Rhapsody” or “SHOUTcast”) is selected on
the S-AIR main unit, you can only select the
same network function on the S-AIR receiver
as function on the S-AIR main unit. However,
you can select input other than network
functions on the S-AIR receiver.
9
Adjust the volume on the S-AIR
receiver.
Notes
• The sound of the S-AIR receiver may be cut off by
operation of the S-AIR main unit.
• When the sound is other than 2 channel stereo,
multi channel sound is downmixed to 2 channel.
• Signals with a sampling frequency of more than
96 kHz cannot output to the S-AIR receiver.
continued