Sony 2-581-922-11 - Manual (Page 19)

19
01GB02CD-EUR.fm masterpage:Right
CDX-NC9950
2-581-922-11 (1)
RDS services
This unit automatically provides RDS services as
follows:
Notes
• Depending on the country/region, not all RDS
functions may be available.
• RDS will not work if the signal strength is too weak,
or if the station you are tuned to is not transmitting
RDS data.
Setting AF and TA/TP
1
Press (AF) and/or (TA) repeatedly
until the desired setting appears.
Storing RDS stations with the AF
and TA setting
You can preset RDS stations along with the AF/
TA setting. If you use the BTM function, only
RDS stations are stored with the same AF/TA
setting.
If you preset manually, you can preset both RDS
and non-RDS stations with the AF/TA setting for
each.
1
Set AF/TA, then store the station with
BTM (page 16) or manually (page 18).
Presetting the volume of traffic
announcements
You can preset the volume level of the traffic
announcements so as to not miss hearing them.
1
Press (VOL) (+) or (VOL) (–) to adjust
the volume level.
2
Press and hold (TA) until “TA”
appears.
Receiving emergency
announcements
With AF or TA on, the emergency
announcements will automatically interrupt the
currently selected source.
Staying with one regional
programme — Regional
When the AF function is on: this unit’s factory
setting restricts reception to a specific region, so
you will not be switched to another regional
station with a stronger frequency.
If you leave this regional programme’s reception
area, set “Regional” in “PlayMode” to “OFF”
(page 33).
Note
This function does not work in the UK and in some
other areas.
Local Link function (UK only)
This function enables you to select other local
stations in the area, even if they are not stored on
your number buttons.
1
During FM reception, press a number
button (
(1) to (6) ) on which a local
station is stored.
2
Within 5 seconds, press again a
number button of the local station.
Repeat this procedure until the local station is
received.
Selecting PTY
1
Press (PTY) during FM reception.
The current programme type name appears if
the station is transmitting PTY data.
2
Press M or m repeatedly until the
desired programme type appears.
AF (Alternative Frequencies)
Selects and retunes the station with the
strongest signal in a network. By using this
function, you can continuously listen to the
same programme during a long-distance drive
without having to retune the same station
manually.
TA (Traffic Announcement)/ TP (Traffic
Programme)
Provides current traffic information/
programmes. Any information/programme
received, will interrupt the currently selected
source.
PTY (Programme Types)
Displays the currently received programme
type. Also searches your selected programme
type.
CT (Clock Time)
The CT data from the RDS transmission sets
the clock.
continue to next page t