Sony 2-581-922-11 - Manual (Page 29)

29
01GB02CD-EUR.fm masterpage:Right
CDX-NC9950
2-581-922-11 (1)
Other Functions
Setting the custom function
— Custom
You can set one of desired functions to the
CUSTOM button so as to perform the function
easily.
The functions listed below are assignable:
Screen - changes the display mode (page 11).
AF - turns the AF function on or off (page 19).
TA - turns the TA function on or off (page 19).
Mode - changes the band number or playback
unit.
ATT - attenuates the sound quickly (page 9).
Capture - stores the image at the moment the
shutter clicked (page 24).
Image - changes the display pattern of the
display mode selected (page 11).
1
Press (MENU) .
2
Press < or , repeatedly to select
“Custom,” then press (ENTER) .
3
Press < or , repeatedly to select the
desired function to assign, then press
(ENTER) .
Each time you press < or ,, the function
changes as follows:
Screen
y AF y TA y Mode y ATT
y Capture y Image y Screen
4
Press (MENU) .
The display returns to the normal display.
Tip
When the optional NVX-HC1 is connected, “Custom”
is not displayed.
Initializing the unit
— Initialize
If you initialize the unit, all additionally stored
images are erased, and the unit returns to the
factory preset condition.
The items listed below are initialized.
Setup (Contrast, Dimmer, Video,
Commander, Demo, Security),
Edit (Name Edit, Name Delete, Picture
Delete, Opening),
Display (Skin, Char Color, Auto Image,
Effect, Wallpaper, Panorama, Aspect, Auto
Clear, Auto Scroll),
Custom, Brightness of the Video mode
1
Press (MENU) .
2
Press < or , repeatedly to select
“Setup,” then press (ENTER) .
3
Press < or , repeatedly to select
“Initialize,” then press (ENTER) .
The confirmation display appears.
When the Code Input display appears
Enter your security code, then press
(ENTER) (page 30).
4
Press < or , repeatedly to select
“YES,” then press (ENTER) .
“Complete” appears, then the display returns
to the previous display.
To cancel initializing, press (MENU).
Notes
• Do not turn off the unit while initializing.
• Initialization takes time depending on the volume of
images stored.
• Note that you cannot restore an image once you
have initialized.
• You cannot delete the pre-stored images in this unit.
Setting the security code
— Security
This unit has a security function to discourage
theft. Input a 4-digit number as your security
code.
If you set it, you need to input the stored code to
turn on the unit should you re-install the unit in
another car or after changing the battery.
Operation by only the card remote
commander:
1
Press (MENU) .
2
Press < or , to select “Setup,” then
press (ENTER) .
3
Press < or , to select “Security,”
then press (ENTER) .
The Code Set display appears.
continue to next page t