Sony 2-581-922-11 - Manual (Page 18)

18
01GB02CD-EUR.fm
CDX-NC9950
2-581-922-11 (1)
masterpage:Left
Storing only desired stations
You can manually preset the desired stations on
any chosen preset memory.
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
desired band.
3
Press < or , to tune in the station
that you want to store.
4
Press the desired number button ( (1)
to (6) ) for 2 seconds until “Memory”
appears.
The number of the button you pressed is
displayed, and then the selected station is
assigned to this number and stored.
Note
If you try to store another station on the same stored
number, the previously stored station will be erased.
Tuning in a station through a
list
— Preset List
You can select a preset station easily from the
list.
1
During radio reception, press (MENU) .
2
Press < or , repeatedly to select
“List,” then press (ENTER) .
If “MW” or “LW” is selected, the Preset List
appears. Skip to step 4.
If “FM” is selected, the list selection display
appears. Proceed to step 3.
3
Press < or , repeatedly to select
“Preset,” then press (ENTER) .
The Preset List appears.
4
Press M or m repeatedly to select the
desired station, then press (ENTER) .
The display returns to the normal display.
RDS
Overview
FM stations with Radio Data System (RDS)
service send inaudible digital information along
with the regular radio programme signal.
Display items
Information on the station/frequency/programme
currently selected is automatically displayed.
Positions of display items differ depending on
the selected face pattern.
For details, see “Selecting the face pattern” on
page 20.
When “Skin1” is selected.
When “Skin2” is selected.
When “Skin3” is selected.
A Source/Band number
B Function and mode status
ST:
Stereo reception mode
: ATT
AF: AF function
TA: Traffic announcements
TP:
Traffic programme
: DSO
: EQ7
C :RDS reception/ :Preset number/
Station name (Frequency), Current status/
Messages
A B
C
A C B
A C
B