Performing initial setup operations, Multi channel surround setup – Sony TR-SL50 User Manual

Page 12

Advertising
background image

12

GB

STR-SL50/40 4-247-584-11(1) (

GB

, FR, DE, ES)

45

°

90

°

20

°

B

C

C

A

A

To avoid damaging your
speakers

Make sure that you turn down the volume
before you turn off the receiver. When you turn
on the receiver, the volume remains at the level
you turn off the receiver.

Performing initial setup
operations

Once you have hooked up the speakers and
turned on the power, clear the receiver’s
memory. Then specify the speaker parameters
(size, position, etc.) and perform any other
initial setup operations necessary for your
system.

Tip

To check the audio output during settings (to set up
while outputting the sound), check the connection
(see page 17).

Clearing the receiver’s
memory

Before using your receiver for the first time, or
when you want to clear the receiver’s memory,
do the following.

1

Turn off the receiver.

2

Hold down ?/1 on the receiver for 5
seconds.

“INITIAL” appears in the display.
The following are reset to their factory
settings.

• All settings in the SET UP, LEVEL and

TONE menus.

• The sound field memorized for each

INPUT SELECTOR and preset station.

• All sound field parameters.
• All preset stations.
• The master volume is set to

“VOL MIN”.

Performing initial setup
operations

Before using your receiver for the first time,
adjust MAIN MENU parameters so that the
receiver correspond to your system. For the
adjustable parameters, see the table on page 39.
See pages 13–17 for speaker settings and pages
29–30 for other settings.

Multi channel surround
setup

For the best possible surround sound, all
speakers should be the same distance from the
listening position (A).

However, the receiver lets you to place the
center speaker up to 1.5 meters closer (B) and
the surround speakers up to 4.5 meters closer
(C) to the listening position.

The front speakers can be placed from 1.0 to
7.0 meters from the listening position (A).

You can place the surround speakers either
behind you or to the side, depending on the
shape of your room (etc.). However, we
recommend that you place the surround
speakers behind you.

When placing surround speakers to your side

(long room)

Speaker system hookups (continued)

01GB04SPK_STRSL50.p65

4/24/03, 5:25 PM

12

Advertising
This manual is related to the following products: