Sony 3-299-549-11(1) - Manual (Page 112)

112 GB
Rated impedance: 3 – 16 Ω
General
Power requirements
220 – 240 V AC,
50/60 Hz
Power consumption On: 50 W
Dimensions (approx.) 85 Ч 100 Ч 330 mm
(w/h/d)
(including EZW-RT10)
85 Ч 100 Ч 345 mm
(w/h/d) including speaker
cord cover and speaker
cord holder
Mass (approx.) 1.7 kg including speaker
cord cover and speaker
cord holder
Wireless transceiver (EZW-RT10)
Communication system S-AIR Specification
version 1.0
Output 12.0 mW
Frequency band 2.4000 GHz – 2.4835 GHz
Modulation method DSSS
Power requirements DC 3.3 V, 350 mA
Dimensions (approx.) 50 Ч 13 Ч 60 mm (w/h/d)
Mass (approx.) 24 g
Wireless transmitter (EZW-T100)
Communication system S-AIR Specification
version 1.0
Output 12.0 mW
Frequency band 2.4000 GHz – 2.4835 GHz
Modulation method DSSS
Power requirements DC 4 V, 550 mA
DC 5 V, 15 mA
Dimensions (approx.) 52 Ч 24 Ч 95 mm
(max. 77 Ч 24 Ч 95 mm)
(w/h/d)
Mass (approx.) 61 g
Design and specifications are subject to change
without notice.
• Standby power consumption
0.3 W.
• Halogenated flame retardants are
not used in the printed wiring
boards.
• Over 85 % power efficiency of
amplifier block is achieved with the
full digital amplifier, S-master.
Digital Cinema Auto Calibration
Digital Cinema Auto Calibration was developed
by Sony to automatically measure and adjust the
speaker settings to your listening environment in
a short period of time.
Dolby Digital
This movie theatre sound format is more
advanced than Dolby Surround Pro Logic. In
this format, the surround speakers output stereo
sound with an expanded frequency range, and a
subwoofer channel for deep bass is
independently provided. This format is also
called “5.1” with the subwoofer channel
designed as the 0.1 channel (since it functions
only when a deep bass effect is needed). All six
channels in this format are recorded separately
for superior channel separation. Furthermore,
since all the signals are processed digitally, less
signal degradation occurs.
Dolby Pro Logic II
Dolby Pro Logic II creates 5 full-bandwidth
output channels from 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colourations.
x Movie mode
The Movie mode is for use with stereo television
shows and all programs encoded in Dolby
Surround. The result is enhanced sound field
directionality that approaches the quality of
discrete 5.1-channel sound.
x Music mode
The Music mode is for use with any stereo music
recordings, and provides a wide and deep sound
space.
Glossary