Sony 3-299-549-11(1) - Manual (Page 27)

27 GB
Getting Star
ted
* If your TV accepts progressive format signals, use this connection and set the output signal of the system to
progressive format (page 37).
** HDMI (High-Definition Multimedia Interface)
If your TV has the HDMI jack, use this connection and select the type of output signal (page 36).
Note
• During the “DMPORT” function, video signal is not output from the HDMI OUT and COMPONENT VIDEO OUT
jacks.
• The system can accept both digital and analog signals. Digital signals have priority over analog signals. If the digital
signal ceases, the analog signal will be processed after 2 seconds.
• When connecting the HDMI cable, make sure that the direction of jacks are the same.
• When connecting the digital optical cord, insert the connector until it clicks into place.
Tip
• You can connect another component, such as a VCR, digital satellite receiver, or PlayStation, to the TV (AUDIO
IN) jacks (A) or TV (DIGITAL IN OPTICAL) jack (B) instead of the TV.
DMPORT
P B /C B
P R /C R
Rear of the control unit
To the VIDEO IN jack of
the TV
To the digital optical output
jack of the TV
Component video cord
(not supplied)
*
Video cord
(supplied) HDMI ** cable
(not supplied)
Audio cord
(not supplied)
Green
Blue
Red
White
Red
To the AUDIO OUT jacks of
the TV
Digital optical cord
(not supplied)
To the HDMI IN jack
of the TV
To the COMPONENT VIDEO IN
jacks of the TV