Sony 3-299-549-11(1) - Manual (Page 78)

78 GB
2
Match the IDs of the S-AIR main unit
and the S-AIR sub unit.
• To set the ID of the S-AIR main unit, see
“To set the ID of the S-AIR main unit”
(page 75).
• To set the ID of the surround amplifier,
see “To set the ID of the surround
amplifier” (page 75).
• To set the ID of the S-AIR receiver, refer
to the operating instructions of the S-AIR
receiver.
3
Press FUNCTION repeatedly until
“DVD” appears in the front panel
display.
4
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
5
Press X/x to select [SETUP],
then press .
The options for [SETUP] appear.
6
Press X/x to select [CUSTOM], then
press .
The Setup Display appears.
7
Press X/x to select [AUDIO SETUP],
then press .
The options for [AUDIO SETUP] appear.
8
Press X/x to select [S-AIR SETUP t],
then press .
Note
• When the wireless transmitter is not inserted in
the S-AIR main unit, [S-AIR SETUP] cannot be
selected.
9
Press X/x to select [PAIRING], then
press .
The confirmation display appears.
10
Press C/c to select [YES], then press
.
The S-AIR main unit starts pairing.
To not perform pairing, select [NO].
11
Start pairing of the S-AIR sub unit.
x For the surround amplifier
Press POWER on the surround amplifier to
turn on the surround amplifier and press
PAIRING on the rear panel of the surround
amplifier.
The PAIRING indicator of the surround
amplifier flashes red when pairing starts.
When sound transmission is established,
the PAIRING indicator of the surround
amplifier turns red and the confirmation
display appears.
Tip
• To press PAIRING on the rear panel of the
surround amplifier, a slim instrument, such as a
paper clip, can be used.
x For the S-AIR receiver
Refer to the operating instructions of the
S-AIR receiver.
When sound transmission is established,
the confirmation display appears.
Note
• Perform the pairing within several minutes after
step 10. If you do not, the pairing is canceled
automatically and the confirmation display
appears. To perform pairing, select [YES]. To
return to the previous display, select [NO].
12
Press C/c to select the next operation.
x To finish pairing
Select [NO], then press .
x To perform pairing of another S-AIR
sub unit
Select [YES], then press .
Note
• If you perform the pairing operation between the
S-AIR main unit and another S-AIR sub unit
(page 77), sound transmission established by ID is
canceled.
• When you perform pairing, [(PAIRING)] appears
beside ID on the display for selecting ID.
To cancel pairing
Perform the ID setting of the S-AIR main unit
according to the procedure of “To set the ID of
the S-AIR main unit” (page 75). If you select a
new ID (you can select the same ID as before),
pairing is canceled.