Sony 3-299-549-11(1) - Manual (Page 33)

33 GB
Getting Star
ted
To prevent the transmission by
neighbours
To prevent the transmission from neighbours,
you can identify the S-AIR main unit and
the surround amplifier by performing the
pairing operation. For details, see “Identifying
the S-AIR main unit with a specific S-AIR sub
unit (Pairing operation)” (page 77).
To attach the cover to the
surround amplifier
After connecting and setting, you can attach the
cover to the surround amplifier for organizing
and storing excess speaker cords.
1
Attach the speaker cord cover by
sliding it down along the grooves along
the edges of the surround amplifier.
Push the speaker cord cover down until you
hear a click. Turn the surround amplifier
upside down, then store the cords in the
speaker cord cover.
2
Insert the tabs of the speaker cord
holder in the slots of the speaker cord
cover, and press it into place.
Note
• When detaching, remove the speaker cord holder,
then remove the speaker cord cover. To remove the
speaker cord holder, slightly press the catch of the
holder and lift off. To remove the speaker cord cover,
slightly splay open the edges of the cover and slide
down.
• Do not use excessive force to store the cords.
Speaker cord cover
Surround amplifier
Grooves
Speaker cord holder
Surround amplifier
m