Samsung DVW-707/707P - Manual (Page 134)

Chapter 4 Adjustments and Settings for Recording
4-56
4
Example of remaining tape indicator
Display Tape time remaining
15-10 15 to 10 minutes
10-5 10 to 5 minutes
5-0 5 to 2 minutes
5-0 (flashing) Less than 2 minutes
q; Audio level indicator
This indicator indicates the level of the audio channel selected by the
monitor switch.
This indicator roughly corresponds to the peak indication of the level
meter of the internal VTR of a sine wave input as follows:
Audio level indicator
For information about turning the audio level indicator on and off, see Section 4-4
“Adjusting the Audio Level” (page 4-24).
qa Subject illumination indicator
This appears, depending on the setting, to indicate that the subject
illumination is inadequate.
qs Shutter speed and mode indicator
This indicator indicates the shutter speed and mode settings.
Level indicator of audio
channel selected by the
monitor switch
VTR level meter
|
–40
|
–30
|
–20
|
–17
|
–14 (dB)
|
–26
|
–23