Samsung DVW-707/707P User Manual
Page 139
Chapter 4 Adjustments and Settings for Recording
4-61
4
4-8-3 Display Mode and Setting Change and
Adjustment Progress Messages
You can limit or suppress the messages that give details of setting
changes and adjustment progress and results by setting a display mode.
The conditions under which messages are displayed and their
correspondence with the display mode are as follows:
Setting change and adjustment progress messages and display modes
Y: Message is displayed.
N: Message is not displayed.
Message display
condition
Message
Display mode
setting
1
2
3
When the filter selection
has been changed
FILTER : n (where n = 1, 2, 3,
4)
N
N
Y
When the gain setting
has been changed
GAIN : n (where n = –3dB,
0dB, 3dB, 6dB, 9dB,12dB,
18dB, 24dB, 30dB, 36dB,
42dB, 48dB)
N
N
Y
When the setting of the
WHITE BAL switch has
been changed
WHITE : n (where n = A CH,
B CH, PRST) or ATW : RUN
N
N
Y
When the OUTPUT/
DCC selector has been
set to DCC ON or OFF
DCC : ON (or OFF)
N
Y
Y
(Continued)