Samsung DVW-707/707P - Manual (Page 14)

Chapter 1 Overview
1-6
1
a) For more information, see “Viewfinder and
related equipment” (page A8).
Video monitor
Field pickup unit
Video monitor
Color image check
while shooting
Color playback
Video monitor
BKW-401 Viewfinder
Rotation Bracket
BVF-VC10W
Color Viewfinder
VA-DN1 Camcorder
Interface Adaptor
RM-B150/RM-P9 b)
Remote Control Unit
BSC-1
Setup Card
BVR-3
Remote Control Unit
Fog-proof filter
(Part No.1-547-341-11)
CA-701/702/702P/
755/755P
Camera Adaptor
1-2 Example of System
Configuration
The diagram below shows a typical configuration of the camcorder for ENG and EFP.
For more information about connections of the additional equipment and accessories,
see Chapter 5, as well as the operation manuals for the connected equipment.
BKDW-702 for outputting an SDI signal
BKDW-703 for Loop Rec function
BKDW-704 for reversing the picture
orientation
(DVW-709WS/709WSP/790WS/
790WSP only)
Extension
Board
b) A CCA-86-0.4 conversion cable (not supplied) is required for connecting the RM-P9 and VA-DN1.
Servo Filter Unit
BKDW-701