Samsung DVW-707/707P - Manual (Page 234)

Chapter 5 Setting Up the Camcorder
5-30
5
DC OUT
Set the AUDIO IN switch for the
appropriate channel to REAR.
AUDIO IN for CH-1 or CH-2
Set the LINE/MIC/
+
48 V ON
selector for the appropriate
channel to MIC.
3
Connect the tuner power cord to the DC OUT connector of the
camcorder, and the audio output cable to the AUDIO IN connector
for channel 1 or 2.
Fitting a WRR-28M (using an NP-1B or BP-90A Battery
Pack)
Before attempting the following attachment, make sure that an NP-1B
Battery Pack is contained in the DC-L1 Battery Adaptor or that a
BP-90A Battery Pack is contained in the DC-L90 Battery Adaptor.
LOCK