Samsung DVW-707/707P User Manual
Page 69
Chapter 3 Recording and Playback
3-11
3
Continuous recording in other cases
After rewinding or fast forward, after removing the cassette, or on a tape
that has been partially recorded, you can obtain a continuous recording
by following the procedure below.
Continuous recording after rewinding or fast forward, after removing the
cassette, or on a tape that has been partly recorded
1
Looking in the viewfinder, press the PLAY button to start playback.
2
Press the STOP button at the desired point to begin recording. To
continue from the end of recording already on the tape, press the
STOP button immediately after the end of the previous recording
(within 0.5 seconds).
3
Press the RET button on the lens. When inputting a video signal to
the GENLOCK IN connector, make sure CAM RET. on
FUNCTION 2/2 page of the setup menu is set to OFF.
For more information, see Section 4-9-2 “Selecting the Functions” (page 4-79).
The tape will rewind and will be positioned at the desired point to
continue recording in about 7 seconds.
4
Press the VTR START button on the camcorder or the VTR button
on the lens to start recording.
4
3
2
1