Samsung DVW-707/707P - Manual (Page 158)

Chapter 4 Adjustments and Settings for Recording
4-80
4
1
Set the MENU ON/OFF/PAGE switch to ON.
The page that was on the screen when the last menu operation ended
appears on the viewfinder screen. (When this menu is first used, the
lowest-numbered one of the currently selected pages appears.)
2
Push the MENU ON/OFF/PAGE switch repeatedly to PAGE until
the FUNCTION 2/2 page shown below appears (or use the rotary
encoder).
FUNCTION 2/2 page (factory settings)
3
Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the item whose setting you want to change
(or use the rotary encoder).
4
Press the rotary encoder, to display a question mark to the left of the
display.
5
Turn the rotary encoder to change the setting of the selected
function.
Function names
?E13*FUNCTION 2/2 ?E13*FUNCTION 2/2
GENLOCK : ON GENLOCK : ON
CAM RET. : OFF
CAM RET. : OFF
FILTER INT. : OFF
FILTER INT. : OFF
FIELD/FRAME : FLD
FIELD/FRAME : FLD
A.IRIS OVERRIDE: OFF
A.IRIS OVERRIDE: OFF
DCCFUNCTION SEL: OFF
DCCFUNCTION SEL: OFF
VTR MODE
VTR MODE : OFF : OFF
RECINHIBIT(CCU): ON RECINHIBIT(CCU): ON
ASSIGNABLE SW : OFF
ASSIGNABLE SW : OFF