Sharp UX-600M - Manual (Page 50)

<P=002>
4
When you hear the reception tone, press
the START key. Replace the handset if
you used it.
•
When transmission is completed, the
fax will beep.
Direct Keypad Dialing
If you do not need to talk with the other party before sending the fax, you can
just dial; it isn’t necessary to pick up the handset or press the SPEAKER key.
♦
Direct Keypad Dialing is a form of automatic dialing, so if you need to in-
sert a pause between any digits of the number, press the REDIAL key. (For
more information on pauses, see "Storing Numbers for Automatic Dialing"
in Chapter 2.)
1
Enter the number of the receiving ma-
chine by pressing the number keys.
2
Check the display. If the number of the
receiving machine shown is correct,
press the START key.
•
If it is not correct, press the STOP key
to backspace and clear one digit at a
time, and then re-enter the correct
digit(s).
START STOP
COPY/
HELP
1 2 3
4 5 6
7 8 9
0
GHI JKL MNO
TUV WXYZ PQRS
ABC DEF
START STOP
COPY/
HELP
Chapter 3 Sending Documents
38