Sharp UX-600M - Manual (Page 80)

<P=002>
7
Enter the Speed Dial number of the re-
ceiving fax machine.
•
If this is a polling operation, go to
Step 10.
(Example)
8
Press the START key.
9
Adjust the resolution and/or contrast
(skip this step if you don’t want to
change settings).
10
Press the START key and then the
STOP key. If this is a transmission op-
eration, load the document in the feeder
sometime before the specified time of
transmission.
To cancel an operation
If you need to cancel an operation after it has been set, follow the steps below.
1
Press the keys shown at right.
TIMER MODE will appear in the dis-
play.
2
Press "#" to cancel a transmission opera-
tion, or "
*" to cancel a polling opera-
tion.
or
3
Press "2" to select CLEAR.
4
Press the START key and then the
STOP key.
1
FUNCTION
0 5
START
START
RESOLUTION
2
STOP START
STOP
Chapter 8 Special Functions
68