Sharp UX-600M - Manual (Page 72)

UX600MU-SFME YF <P=001>
Memory
Your fax has a memory which can be used to temporarily store both incoming
and outgoing documents.
♦
Approximately 37 pages of average content can be held in memory if they
are all going to be transmitted (25 pages if Option Setting 18, Error Correc-
tion Mode, is set to YES), or 30 pages if they are all received (27 pages if
Option Setting 18 is set to YES). Less can be held if any were scanned us-
ing fine or halftone resolution.
Sending documents from memory
With this function, the original document is scanned immediately, stored in
memory, and then transmitted once the connection to the receiving machine is
made. This is convenient when transmitting to places where the line is often
busy, as it saves you from waiting to pick up the original document and frees
the feeder for other operations. After transmission, the document will be
cleared from memory.
♦
Only one memory transmission can be set at a time.
♦
The amount of memory currently occupied appears as a percentage in the
display while the document is being scanned.
1
Load the document(s).
•
Set the resolution and/or contrast if de-
sired.
2
Press the MEMORY key and then "1".
3
Enter the number of the receiving ma-
chine using one of the following methods:
•
Press a Rapid Key.
•
Press the SPEED DIAL key and enter
a Speed Dial number.
•
Enter a full telephone number by press-
ing the number keys.
MEMORY
(Example)
1
01
20
Chapter 8 Special Functions
60